Skip to content

Freight · Lower 48 & beyond

Shipping & Delivery

Engines ship crated or bolted to a skid by LTL freight, quoted per unit against the real weight and lane. No flat rate, no surprise surcharge at the kerb — the number you get is the number you pay.

Per unit

Freight quoted, not flat-rated

Skid

Crated & strapped

48

States shipped

A diesel engine crated and strapped to a skid for freight

How it works

From the shelf to your shop floor

You never have to work out how to palletise an engine or which carrier will take it. We crate it, book the lane and hand you the tracking number.

  1. 01

    Confirm the unit

    We check the engine is still on the shelf and go through the serial, arrangement or CPL number against your build.

  2. 02

    Quote the freight

    Give us the delivery ZIP code and whether you have a loading dock or a forklift. We price crating and LTL freight for that specific unit.

  3. 03

    Crated & collected

    The engine is drained where the carrier requires it, bolted to a skid or crated, strapped and released to the carrier with its paperwork.

  4. 04

    Delivered & unloaded

    The carrier calls ahead to arrange delivery. A forklift or a dock gets it off the truck; liftgate service can be added at quote time.

Ways it can ship

Pick the one that matches what you have at the delivery end.

LTL freight, dock or forklift at delivery Standard — lowest cost
LTL freight with liftgate / residential delivery Quoted as an extra
Dedicated or expedited truck By quote, for time-critical repowers
Your own carrier, collected from us No freight charge — we load it
Export crating to a US port By quote, destination port required

Transit times are set by the carrier and the lane; the ETA comes with the bill of lading.

What a freight quote covers

  • Crating or skid-mounting, strapping and load securing
  • Fluids drained where the carrier or the lane requires it
  • Photographs of the unit as crated, before it leaves
  • Bill of lading, invoice and the identification numbers for the assembly
  • Freight booked with the carrier and the tracking number sent to you
  • Liftgate, residential or inside delivery added at quote time when you need it
No forklift, no dock? Say so when you ask for the quote. A liftgate is far cheaper arranged up front than discovered at the kerb.

Receiving the engine

Five minutes that protect your claim

A diesel engine is a dense, top-heavy shipment. It travels well on a skid, but freight is freight: forks go through crates, straps loosen, and the only record of how it arrived is the delivery receipt you sign.

Before you sign, walk around it. Check the crate and the skid, look at the turbo, the accessory drive and anything that stands proud of the block, and compare it with the photographs we sent at dispatch. If something is wrong, write it on the receipt and photograph it while the truck is still there.

Then call us. We would far rather hear about it on delivery day than a fortnight later, and a noted receipt is what makes a carrier claim work.

On delivery day

  • ✓Have the forklift or dock ready for the booked window
  • ✓Check the crate and skid before the driver leaves
  • ✓Compare the unit against the dispatch photographs
  • ✓Note any damage on the delivery receipt, then photograph it
  • ✓Keep the bill of lading with the invoice
  • ✓Give us the serial number if you need parts advice
Freight FAQ

Shipping FAQ

Common questions

Can’t find your answer? Call (470) 201-3931 or send us a message.

How much does freight cost?
It is quoted per engine, not advertised as a flat rate, because the weight of a 6-cylinder take-out, a skid-mounted power unit and a generator set are three very different shipments. Tell us the delivery ZIP code and whether you have a dock or a forklift and we will give you the real figure before you commit.
How long does delivery take?
Crating and release usually take a couple of business days after payment clears; LTL transit across the continental United States typically runs a few days to about a week depending on the lane. The carrier gives an ETA when the bill of lading is issued.
What do I need at the delivery address?
A forklift rated for the weight, or a loading dock. If you have neither, ask for a liftgate at quote time — an engine on a skid cannot be lifted off a trailer by hand.
Is the engine insured in transit?
Freight is booked with cargo coverage; the level available depends on the carrier and the declared value, so we confirm it on the quote rather than make a blanket promise here. Note any damage on the delivery receipt before you sign — that receipt is what a claim rests on.
Can I collect the engine myself or send my own carrier?
Yes, and it is usually the cheapest option if you are within driving distance or already have a hauler. Give us the carrier and a pickup window and the unit will be loaded and ready with its paperwork.
Do you ship to Alaska, Hawaii or outside the USA?
Yes, by quote. Those lanes involve a port leg and often export crating, so they are priced individually — send the destination and we will work it out.
What paperwork comes with the engine?
The invoice, the bill of lading, and the identification numbers for the assembly — serial, and arrangement or CPL where the unit carries one — so your parts supplier can order against the right build from day one.

Need a freight number before you commit?

Send the stock number and your delivery ZIP code. You will get the crated weight and the freight cost before you pay for anything.

Call us · Mon–Sat 9am–6pm CST (470) 201-3931